Soldering Page: Difference between revisions
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
=Temperature= | =Temperature= | ||
On the video it 400°C for lead free 450°C | On the video it 400°C for lead free 450°C | ||
=Soldering a Resistor Wire= | |||
I used to want to melt the solder onto the joint but you need to heat the joint, in this case a resistor wire and the pad on the board together.<br> | |||
[[File:Screenshot from 2022-10-29 12-38-21 small.png]]<br> | |||
=Joining Wires= | =Joining Wires= | ||
When joining wires, tin the wires first by heating the wire and then adding the solder.<br> | When joining wires, tin the wires first by heating the wire and then adding the solder.<br> | ||
Revision as of 23:39, 28 October 2022
Introduction
All things soldering or should I say sodering gar damn
Mine
Here is mine. [Hakko FX-888d]
Manual
Temperature
On the video it 400°C for lead free 450°C
Soldering a Resistor Wire
I used to want to melt the solder onto the joint but you need to heat the joint, in this case a resistor wire and the pad on the board together.
Joining Wires
When joining wires, tin the wires first by heating the wire and then adding the solder.
Add Heat shrink one end and Hold Wires in position
Next join the two wires together
