Soldering Page: Difference between revisions
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
[[File:Screenshot from 2022-10-29 12-43-06 small.png]]<br> | [[File:Screenshot from 2022-10-29 12-43-06 small.png]]<br> | ||
In this example, the person heated the pad and wire for 8 seconds before applying solder<br> | In this example, the person heated the pad and wire for 8 seconds before applying solder<br> | ||
File:Screenshot from 2022-10-29 12-59-32 small.png<br> | [[File:Screenshot from 2022-10-29 12-59-32 small.png]]<br> | ||
=Joining Wires= | =Joining Wires= | ||
Revision as of 00:01, 29 October 2022
Introduction
All things soldering or should I say sodering gar damn
Mine
Here is mine. [Hakko FX-888d]
Manual
Temperature
On the video it 400°C for lead free 450°C
Soldering a Resistor Wire
I used to want to melt the solder onto the joint but you need to heat the joint, in this case a resistor wire and the pad on the board together.
Then add the solder
This is what finished looks like with resin around the outside
In this example, the person heated the pad and wire for 8 seconds before applying solder
Joining Wires
When joining wires, tin the wires first by heating the wire and then adding the solder.
Add Heat shrink one end and Hold Wires in position
Next join the two wires together
