Nano Every Page: Difference between revisions
Jump to navigation
Jump to search
| Line 828: | Line 828: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
Looking at this, and not that familiar with rust, I think they have renamed llvm_asm to asm and this appears avr_delay presumably used by ruduino. This went into the too hard basket and I went looking for a different hal. Next up is avr-oxide. Putting in the latest version at the time 0.4.0 ( nothing is version 1.0.0 :grinning: ). So running the build gives new and more fun problems. | Looking at this, and not that familiar with rust, I think they have renamed llvm_asm to asm and this appears avr_delay presumably used by ruduino. This went into the too hard basket and I went looking for a different hal. Next up is avr-oxide. Putting in the latest version at the time 0.4.0 ( nothing is version 1.0.0 :grinning: ). So running the build gives new and more fun problems. | ||
<syntaxhighlight lange="bash"> | |||
| | |||
22 | compile_error!("A clockspeed feature (\"16MHz\", \"20MHz\") must be enabled for this crate"); | |||
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | |||
</syntaxhighlight> | |||
Revision as of 00:41, 20 May 2023
Introduction
I while ago I started my interest in the 6502 where it all began to me. This led me to Ben Eater and building an 8-bit computer. Which led me to building a EEPROM programmer and a Nano was required to build it. I had a bit of work to do and my interest seemed to be waning a little. Partly because of the time to get it to work and and because I just felt demotivated. So I solved my motivation by returning to rust and saw that it is possible to run it on a Nano Every. Let the games begin.
Ben's EEPROM
The Board
Here is the EEPROM. I think I made it look quite pretty with the colours. Funny how that seemed important at the time.
The Circuit
I ended up using the circuit from Ben's page. The nano D5 connected to the AT28C256
The Code
And of course the code.
#define SHIFT_DATA 2
#define SHIFT_CLK 3
#define SHIFT_LATCH 4
#define WRITE_EN 13
// 32 byte test pattern to verify the EEPROM device. The pattern includes a walking one
// and a walking zero, which may help to detect pins that are tied together or swapped.
// byte data[] = {
// 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H',
// 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
// 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0xfe,
// 0x00, 0xff, 0x55, 0xaa, '0', '1', '2', '3'
// };
byte data[] = {
'A', 'B', 'B', 'D', 'E', 'F', 'G', 'H',
'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H'
};
void enableWrite() { digitalWrite(WRITE_EN, LOW);}
void disableWrite() { digitalWrite(WRITE_EN, HIGH);}
// Read a byte from the data bus. The caller must set the bus to input_mode
// before calling this or no useful data will be returned.
byte readDataBus() {
return (PINB << 3) | (PIND >> 5);
}
// Read a byte from the EEPROM at the specified address.
byte readEEPROM(int address) {
setDataBusMode(INPUT);
setAddress(address, /*outputEnable*/ true);
return readDataBus();
}
// Write a byte to the EEPROM at the specified address.
void writeEEPROM(int address, byte data) {
setAddress(address, /*outputEnable*/ false);
setDataBusMode(OUTPUT);
writeDataBus(data);
enableWrite();
// delayMicroseconds(1);
disableWrite();
delay(10);
}
// Read the first 256 byte block of the EEPROM and dump it to the serial monitor.
void printContents(int size) {
for (int base = 0; (base < size); base += 16) {
byte data[16];
for (int offset = 0; offset <= 15; offset += 1) {
data[offset] = readEEPROM(base + offset);
}
char buf[80];
sprintf(buf, "%04x: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
base, data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7],
data[8], data[9], data[10], data[11], data[12], data[13], data[14], data[15]);
Serial.println(buf);
}
}
// Output the address bits and outputEnable signal using shift registers.
void setAddress(int addr, bool outputEnable) {
// Set the highest bit as the output enable bit (active low)
if (outputEnable) {
addr &= ~0x8000;
} else {
addr |= 0x8000;
}
byte dataMask = 0x04;
byte clkMask = 0x08;
byte latchMask = 0x10;
// Make sure the clock is low to start.
PORTD &= ~clkMask;
// Shift 16 bits in, starting with the MSB.
for (uint16_t ix = 0; (ix < 16); ix++)
{
// Set the data bit
if (addr & 0x8000)
{
PORTD |= dataMask;
}
else
{
PORTD &= ~dataMask;
}
// Toggle the clock high then low
PORTD |= clkMask;
// delayMicroseconds(3);
PORTD &= ~clkMask;
addr <<= 1;
}
// Latch the shift register contents into the output register.
PORTD &= ~latchMask;
// delayMicroseconds(1);
PORTD |= latchMask;
// delayMicroseconds(1);
PORTD &= ~latchMask;
}
// Write a byte to the data bus. The caller must set the bus to output_mode
// before calling this or no data will be written.
void writeDataBus(byte data) {
PORTB = (PORTB & 0xe0) | (data >> 3);
PORTD = (PORTD & 0x1f) | (data << 5);
}
// Set an address and data value and toggle the write control. This is used
// to write control sequences, like the software write protect. This is not a
// complete byte write function because it does not set the chip enable or the
// mode of the data bus.
void setByte(byte value, word address) {
setAddress(address, false);
writeDataBus(value);
// delayMicroseconds(1);
enableWrite();
// delayMicroseconds(1);
disableWrite();
}
// Set the I/O state of the data bus.
// The 8 bits data bus are is on pins D5..D12.
void setDataBusMode(uint8_t mode) {
// On the Uno and Nano, D5..D12 maps to the upper 3 bits of port D and the
// lower 5 bits of port B.
if (mode == OUTPUT) {
DDRB |= 0x1f;
DDRD |= 0xe0;
} else {
DDRB &= 0xe0;
DDRD &= 0x1f;
}
}
void disableSoftwareWriteProtect() {
disableWrite();
setDataBusMode(OUTPUT);
setByte(0xaa, 0x5555);
setByte(0x55, 0x2aaa);
setByte(0x80, 0x5555);
setByte(0xaa, 0x5555);
setByte(0x55, 0x2aaa);
setByte(0x20, 0x5555);
setDataBusMode(INPUT);
delay(10);
}
void setup() {
// put your setup code here, to run once:
pinMode(SHIFT_DATA, OUTPUT);
pinMode(SHIFT_CLK, OUTPUT);
pinMode(SHIFT_LATCH, OUTPUT);
disableWrite();
pinMode(WRITE_EN, OUTPUT);
Serial.begin(115200);
Serial.print("\nDisabling EEPROM Software Data Protection(SDP)...");
disableSoftwareWriteProtect();
Serial.println(" done\n");
// Read and print out the contents of the EERPROM
Serial.println("Reading EEPROM");
printContents(32);
// Program a test pattern and fill the remainder of the first block with 0xff
Serial.print("Programming EEPROM...");
for (word address = 0; (address < sizeof(data)); address++) {
writeEEPROM(address, data[address]);
}
// for (word address = sizeof(data); (address < 256); address++) {
// writeEEPROM(address, 0xfe);
// }
Serial.println(" done\n");
// Read and print out the contents of the EERPROM
Serial.println("Reading EEPROM");
printContents(32);
}
void loop()
{
// put your main code here, to run repeatedly:
}
Disabling Software Protection (SDP)
I did not like the use of PORTC, PORTD etc as this suggested shortcuts and would obfuscate the code. But reading more I found that the code struggled to meet the timings to disable the AT28C256 protections which is why it took me so long to get this going. Many thanks to TommyPROM which was my last port of call. https://tomnisbet.github.io/TommyPROM/28C256-notes/
Blink and VS Code with Nano Every
Really do not like the Arduino IDE so was really happy VS Code not supports it with the Microsoft Extension. Just look at the colours and the status bar, board, usb port.
Had to add the udev rules in /etc/udev/rules.d/99-arduino-nano.rules
# Arduino nano
SUBSYSTEM=="tty", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0058", PROGRAM="/usr/bin/arduino-udev-name -w 2 %k", SYMLINK+="%c", GROUP="plugdev"
These were generated by the plugin but here for reference. (Loving the nona) in arduino.json
{
"port": "/dev/ttyACM0",
"configuration": "mode=on",
"board": "arduino:megaavr:nona4809",
"sketch": "blinkNative.ino"
}
and c_cpp_properties.json
{
"version": 4,
"configurations": [
{
"name": "Arduino",
"compilerPath": "/home/iwiseman/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/bin/avr-g++",
"compilerArgs": [
"-w",
"-std=gnu++11",
"-fpermissive",
"-fno-exceptions",
"-ffunction-sections",
"-fdata-sections",
"-fno-threadsafe-statics",
"-Wno-error=narrowing"
],
"intelliSenseMode": "gcc-x64",
"includePath": [
"/home/iwiseman/.arduino15/packages/arduino/hardware/megaavr/1.8.8/cores/arduino/api/deprecated",
"/home/iwiseman/.arduino15/packages/arduino/hardware/megaavr/1.8.8/cores/arduino",
"/home/iwiseman/.arduino15/packages/arduino/hardware/megaavr/1.8.8/variants/nona4809",
"/home/iwiseman/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/lib/gcc/avr/7.3.0/include",
"/home/iwiseman/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/lib/gcc/avr/7.3.0/include-fixed",
"/home/iwiseman/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include"
],
"forcedInclude": [
"/home/iwiseman/.arduino15/packages/arduino/hardware/megaavr/1.8.8/cores/arduino/Arduino.h"
],
"cStandard": "c11",
"cppStandard": "c++11",
"defines": [
"F_CPU=16000000L",
"ARDUINO=10607",
"ARDUINO_AVR_NANO_EVERY",
"ARDUINO_ARCH_MEGAAVR",
"AVR_NANO_4809_328MODE",
"MILLIS_USE_TIMERB3",
"NO_EXTERNAL_I2C_PULLUP",
"__DBL_MIN_EXP__=(-125)",
"__HQ_FBIT__=15",
"__cpp_attributes=200809",
"__UINT_LEAST16_MAX__=0xffffU",
"__ATOMIC_ACQUIRE=2",
"__SFRACT_IBIT__=0",
"__FLT_MIN__=1.17549435e-38F",
"__GCC_IEC_559_COMPLEX=0",
"__BUILTIN_AVR_SLEEP=1",
"__BUILTIN_AVR_COUNTLSULLK=1",
"__cpp_aggregate_nsdmi=201304",
"__BUILTIN_AVR_COUNTLSULLR=1",
"__UFRACT_MAX__=0XFFFFP-16UR",
"__UINT_LEAST8_TYPE__=unsigned char",
"__DQ_FBIT__=63",
"__INTMAX_C(c)=c ## LL",
"__ULFRACT_FBIT__=32",
"__SACCUM_EPSILON__=0x1P-7HK",
"__CHAR_BIT__=8",
"__USQ_IBIT__=0",
"__UINT8_MAX__=0xff",
"__ACCUM_FBIT__=15",
"__WINT_MAX__=0x7fff",
"__FLT32_MIN_EXP__=(-125)",
"__cpp_static_assert=200410",
"__USFRACT_FBIT__=8",
"__ORDER_LITTLE_ENDIAN__=1234",
"__SIZE_MAX__=0xffffU",
"__WCHAR_MAX__=0x7fff",
"__LACCUM_IBIT__=32",
"__DBL_DENORM_MIN__=double(1.40129846e-45L)",
"__GCC_ATOMIC_CHAR_LOCK_FREE=1",
"__GCC_IEC_559=0",
"__FLT_EVAL_METHOD__=0",
"__BUILTIN_AVR_LLKBITS=1",
"__cpp_binary_literals=201304",
"__LLACCUM_MAX__=0X7FFFFFFFFFFFFFFFP-47LLK",
"__GCC_ATOMIC_CHAR32_T_LOCK_FREE=1",
"__BUILTIN_AVR_HKBITS=1",
"__BUILTIN_AVR_BITSLLK=1",
"__FRACT_FBIT__=15",
"__BUILTIN_AVR_BITSLLR=1",
"__cpp_variadic_templates=200704",
"__UINT_FAST64_MAX__=0xffffffffffffffffULL",
"__SIG_ATOMIC_TYPE__=char",
"__BUILTIN_AVR_UHKBITS=1",
"__UACCUM_FBIT__=16",
"__DBL_MIN_10_EXP__=(-37)",
"__FINITE_MATH_ONLY__=0",
"__cpp_variable_templates=201304",
"__LFRACT_IBIT__=0",
"__GNUC_PATCHLEVEL__=0",
"__FLT32_HAS_DENORM__=1",
"__LFRACT_MAX__=0X7FFFFFFFP-31LR",
"__UINT_FAST8_MAX__=0xff",
"__has_include(STR)=__has_include__(STR)",
"__DEC64_MAX_EXP__=385",
"__INT8_C(c)=c",
"__INT_LEAST8_WIDTH__=8",
"__UINT_LEAST64_MAX__=0xffffffffffffffffULL",
"__SA_FBIT__=15",
"__SHRT_MAX__=0x7fff",
"__LDBL_MAX__=3.40282347e+38L",
"__FRACT_MAX__=0X7FFFP-15R",
"__UFRACT_FBIT__=16",
"__UFRACT_MIN__=0.0UR",
"__UINT_LEAST8_MAX__=0xff",
"__GCC_ATOMIC_BOOL_LOCK_FREE=1",
"__UINTMAX_TYPE__=long long unsigned int",
"__LLFRACT_EPSILON__=0x1P-63LLR",
"__BUILTIN_AVR_DELAY_CYCLES=1",
"__DEC32_EPSILON__=1E-6DF",
"__FLT_EVAL_METHOD_TS_18661_3__=0",
"__UINT32_MAX__=0xffffffffUL",
"__GXX_EXPERIMENTAL_CXX0X__=1",
"__ULFRACT_MAX__=0XFFFFFFFFP-32ULR",
"__TA_IBIT__=16",
"__LDBL_MAX_EXP__=128",
"__WINT_MIN__=(-__WINT_MAX__ - 1)",
"__INT_LEAST16_WIDTH__=16",
"__ULLFRACT_MIN__=0.0ULLR",
"__SCHAR_MAX__=0x7f",
"__WCHAR_MIN__=(-__WCHAR_MAX__ - 1)",
"__INT64_C(c)=c ## LL",
"__DBL_DIG__=6",
"__GCC_ATOMIC_POINTER_LOCK_FREE=1",
"__AVR_HAVE_SPH__=1",
"__LLACCUM_MIN__=(-0X1P15LLK-0X1P15LLK)",
"__BUILTIN_AVR_KBITS=1",
"__BUILTIN_AVR_ABSK=1",
"__BUILTIN_AVR_ABSR=1",
"__SIZEOF_INT__=2",
"__SIZEOF_POINTER__=2",
"__GCC_ATOMIC_CHAR16_T_LOCK_FREE=1",
"__USACCUM_IBIT__=8",
"__USER_LABEL_PREFIX__",
"__STDC_HOSTED__=1",
"__LDBL_HAS_INFINITY__=1",
"__LFRACT_MIN__=(-0.5LR-0.5LR)",
"__HA_IBIT__=8",
"__FLT32_DIG__=6",
"__TQ_IBIT__=0",
"__FLT_EPSILON__=1.19209290e-7F",
"__GXX_WEAK__=1",
"__SHRT_WIDTH__=16",
"__USFRACT_IBIT__=0",
"__LDBL_MIN__=1.17549435e-38L",
"__FRACT_MIN__=(-0.5R-0.5R)",
"__AVR_SFR_OFFSET__=0x20",
"__DEC32_MAX__=9.999999E96DF",
"__cpp_threadsafe_static_init=200806",
"__DA_IBIT__=32",
"__INT32_MAX__=0x7fffffffL",
"__UQQ_FBIT__=8",
"__INT_WIDTH__=16",
"__SIZEOF_LONG__=4",
"__UACCUM_MAX__=0XFFFFFFFFP-16UK",
"__UINT16_C(c)=c ## U",
"__PTRDIFF_WIDTH__=16",
"__DECIMAL_DIG__=9",
"__LFRACT_EPSILON__=0x1P-31LR",
"__AVR_2_BYTE_PC__=1",
"__ULFRACT_MIN__=0.0ULR",
"__INTMAX_WIDTH__=64",
"__has_include_next(STR)=__has_include_next__(STR)",
"__BUILTIN_AVR_ULLRBITS=1",
"__LDBL_HAS_QUIET_NAN__=1",
"__ULACCUM_IBIT__=32",
"__UACCUM_EPSILON__=0x1P-16UK",
"__BUILTIN_AVR_SEI=1",
"__GNUC__=7",
"__ULLACCUM_MAX__=0XFFFFFFFFFFFFFFFFP-48ULLK",
"__cpp_delegating_constructors=200604",
"__HQ_IBIT__=0",
"__BUILTIN_AVR_SWAP=1",
"__FLT_HAS_DENORM__=1",
"__SIZEOF_LONG_DOUBLE__=4",
"__BIGGEST_ALIGNMENT__=1",
"__STDC_UTF_16__=1",
"__UINT24_MAX__=16777215UL",
"__BUILTIN_AVR_NOP=1",
"__GNUC_STDC_INLINE__=1",
"__DQ_IBIT__=0",
"__FLT32_HAS_INFINITY__=1",
"__DBL_MAX__=double(3.40282347e+38L)",
"__ULFRACT_IBIT__=0",
"__cpp_raw_strings=200710",
"__INT_FAST32_MAX__=0x7fffffffL",
"__DBL_HAS_INFINITY__=1",
"__INT64_MAX__=0x7fffffffffffffffLL",
"__ACCUM_IBIT__=16",
"__DEC32_MIN_EXP__=(-94)",
"__BUILTIN_AVR_UKBITS=1",
"__INTPTR_WIDTH__=16",
"__BUILTIN_AVR_FMULSU=1",
"__LACCUM_MAX__=0X7FFFFFFFFFFFFFFFP-31LK",
"__INT_FAST16_TYPE__=int",
"__LDBL_HAS_DENORM__=1",
"__BUILTIN_AVR_BITSK=1",
"__BUILTIN_AVR_BITSR=1",
"__cplusplus=201402L",
"__cpp_ref_qualifiers=200710",
"__DEC128_MAX__=9.999999999999999999999999999999999E6144DL",
"__INT_LEAST32_MAX__=0x7fffffffL",
"__USING_SJLJ_EXCEPTIONS__=1",
"__DEC32_MIN__=1E-95DF",
"__ACCUM_MAX__=0X7FFFFFFFP-15K",
"__DEPRECATED=1",
"__cpp_rvalue_references=200610",
"__DBL_MAX_EXP__=128",
"__USACCUM_EPSILON__=0x1P-8UHK",
"__WCHAR_WIDTH__=16",
"__FLT32_MAX__=3.40282347e+38F32",
"__DEC128_EPSILON__=1E-33DL",
"__SFRACT_MAX__=0X7FP-7HR",
"__FRACT_IBIT__=0",
"__PTRDIFF_MAX__=0x7fff",
"__UACCUM_MIN__=0.0UK",
"__UACCUM_IBIT__=16",
"__BUILTIN_AVR_NOPS=1",
"__BUILTIN_AVR_WDR=1",
"__FLT32_HAS_QUIET_NAN__=1",
"__GNUG__=7",
"__LONG_LONG_MAX__=0x7fffffffffffffffLL",
"__SIZEOF_SIZE_T__=2",
"__ULACCUM_MAX__=0XFFFFFFFFFFFFFFFFP-32ULK",
"__cpp_rvalue_reference=200610",
"__cpp_nsdmi=200809",
"__SIZEOF_WINT_T__=2",
"__LONG_LONG_WIDTH__=64",
"__cpp_initializer_lists=200806",
"__FLT32_MAX_EXP__=128",
"__SA_IBIT__=16",
"__ULLACCUM_MIN__=0.0ULLK",
"__BUILTIN_AVR_ROUNDUHK=1",
"__BUILTIN_AVR_ROUNDUHR=1",
"__cpp_hex_float=201603",
"__GXX_ABI_VERSION=1011",
"__INT24_MAX__=8388607L",
"__UTA_FBIT__=48",
"__FLT_MIN_EXP__=(-125)",
"__USFRACT_MAX__=0XFFP-8UHR",
"__UFRACT_IBIT__=0",
"__BUILTIN_AVR_ROUNDFX=1",
"__BUILTIN_AVR_ROUNDULK=1",
"__BUILTIN_AVR_ROUNDULR=1",
"__cpp_lambdas=200907",
"__BUILTIN_AVR_COUNTLSLLK=1",
"__BUILTIN_AVR_COUNTLSLLR=1",
"__BUILTIN_AVR_ROUNDHK=1",
"__INT_FAST64_TYPE__=long long int",
"__BUILTIN_AVR_ROUNDHR=1",
"__DBL_MIN__=double(1.17549435e-38L)",
"__BUILTIN_AVR_COUNTLSK=1",
"__BUILTIN_AVR_ROUNDLK=1",
"__BUILTIN_AVR_COUNTLSR=1",
"__BUILTIN_AVR_ROUNDLR=1",
"__LACCUM_MIN__=(-0X1P31LK-0X1P31LK)",
"__ULLACCUM_FBIT__=48",
"__BUILTIN_AVR_LKBITS=1",
"__ULLFRACT_EPSILON__=0x1P-64ULLR",
"__DEC128_MIN__=1E-6143DL",
"__REGISTER_PREFIX__",
"__UINT16_MAX__=0xffffU",
"__DBL_HAS_DENORM__=1",
"__BUILTIN_AVR_ULKBITS=1",
"__ACCUM_MIN__=(-0X1P15K-0X1P15K)",
"__AVR_ARCH__=2",
"__SQ_IBIT__=0",
"__FLT32_MIN__=1.17549435e-38F32",
"__UINT8_TYPE__=unsigned char",
"__BUILTIN_AVR_ROUNDUK=1",
"__BUILTIN_AVR_ROUNDUR=1",
"__UHA_FBIT__=8",
"__NO_INLINE__=1",
"__SFRACT_MIN__=(-0.5HR-0.5HR)",
"__UTQ_FBIT__=128",
"__FLT_MANT_DIG__=24",
"__LDBL_DECIMAL_DIG__=9",
"__VERSION__=\"7.3.0\"",
"__UINT64_C(c)=c ## ULL",
"__ULLFRACT_FBIT__=64",
"__cpp_unicode_characters=200704",
"__FRACT_EPSILON__=0x1P-15R",
"__ULACCUM_MIN__=0.0ULK",
"__UDA_FBIT__=32",
"__cpp_decltype_auto=201304",
"__LLACCUM_EPSILON__=0x1P-47LLK",
"__GCC_ATOMIC_INT_LOCK_FREE=1",
"__FLT32_MANT_DIG__=24",
"__BUILTIN_AVR_BITSUHK=1",
"__BUILTIN_AVR_BITSUHR=1",
"__FLOAT_WORD_ORDER__=__ORDER_LITTLE_ENDIAN__",
"__USFRACT_MIN__=0.0UHR",
"__BUILTIN_AVR_BITSULK=1",
"__ULLACCUM_IBIT__=16",
"__BUILTIN_AVR_BITSULR=1",
"__UQQ_IBIT__=0",
"__BUILTIN_AVR_LLRBITS=1",
"__SCHAR_WIDTH__=8",
"__BUILTIN_AVR_BITSULLK=1",
"__BUILTIN_AVR_BITSULLR=1",
"__INT32_C(c)=c ## L",
"__DEC64_EPSILON__=1E-15DD",
"__ORDER_PDP_ENDIAN__=3412",
"__DEC128_MIN_EXP__=(-6142)",
"__UHQ_FBIT__=16",
"__LLACCUM_FBIT__=47",
"__FLT32_MAX_10_EXP__=38",
"__BUILTIN_AVR_ROUNDULLK=1",
"__BUILTIN_AVR_ROUNDULLR=1",
"__INT_FAST32_TYPE__=long int",
"__BUILTIN_AVR_HRBITS=1",
"__UINT_LEAST16_TYPE__=unsigned int",
"__BUILTIN_AVR_UHRBITS=1",
"__INT16_MAX__=0x7fff",
"__SIZE_TYPE__=unsigned int",
"__UINT64_MAX__=0xffffffffffffffffULL",
"__UDQ_FBIT__=64",
"__INT8_TYPE__=signed char",
"__cpp_digit_separators=201309",
"__ELF__=1",
"__ULFRACT_EPSILON__=0x1P-32ULR",
"__LLFRACT_FBIT__=63",
"__FLT_RADIX__=2",
"__INT_LEAST16_TYPE__=int",
"__BUILTIN_AVR_ABSFX=1",
"__LDBL_EPSILON__=1.19209290e-7L",
"__UINTMAX_C(c)=c ## ULL",
"__INT24_MIN__=(-__INT24_MAX__-1)",
"__SACCUM_MAX__=0X7FFFP-7HK",
"__BUILTIN_AVR_ABSHR=1",
"__SIG_ATOMIC_MAX__=0x7f",
"__GCC_ATOMIC_WCHAR_T_LOCK_FREE=1",
"__cpp_sized_deallocation=201309",
"__SIZEOF_PTRDIFF_T__=2",
"__AVR=1",
"__BUILTIN_AVR_ABSLK=1",
"__BUILTIN_AVR_ABSLR=1",
"__LACCUM_EPSILON__=0x1P-31LK",
"__DEC32_SUBNORMAL_MIN__=0.000001E-95DF",
"__INT_FAST16_MAX__=0x7fff",
"__UINT_FAST32_MAX__=0xffffffffUL",
"__UINT_LEAST64_TYPE__=long long unsigned int",
"__USACCUM_MAX__=0XFFFFP-8UHK",
"__SFRACT_EPSILON__=0x1P-7HR",
"__FLT_HAS_QUIET_NAN__=1",
"__FLT_MAX_10_EXP__=38",
"__LONG_MAX__=0x7fffffffL",
"__DEC128_SUBNORMAL_MIN__=0.000000000000000000000000000000001E-6143DL",
"__FLT_HAS_INFINITY__=1",
"__cpp_unicode_literals=200710",
"__USA_FBIT__=16",
"__UINT_FAST16_TYPE__=unsigned int",
"__DEC64_MAX__=9.999999999999999E384DD",
"__INT_FAST32_WIDTH__=32",
"__BUILTIN_AVR_RBITS=1",
"__CHAR16_TYPE__=unsigned int",
"__PRAGMA_REDEFINE_EXTNAME=1",
"__SIZE_WIDTH__=16",
"__INT_LEAST16_MAX__=0x7fff",
"__DEC64_MANT_DIG__=16",
"__UINT_LEAST32_MAX__=0xffffffffUL",
"__SACCUM_FBIT__=7",
"__FLT32_DENORM_MIN__=1.40129846e-45F32",
"__GCC_ATOMIC_LONG_LOCK_FREE=1",
"__SIG_ATOMIC_WIDTH__=8",
"__INT_LEAST64_TYPE__=long long int",
"__INT16_TYPE__=int",
"__INT_LEAST8_TYPE__=signed char",
"__SQ_FBIT__=31",
"__DEC32_MAX_EXP__=97",
"__INT_FAST8_MAX__=0x7f",
"__INTPTR_MAX__=0x7fff",
"__QQ_FBIT__=7",
"__cpp_range_based_for=200907",
"__UTA_IBIT__=16",
"__AVR_ERRATA_SKIP__=1",
"__FLT32_MIN_10_EXP__=(-37)",
"__LDBL_MANT_DIG__=24",
"__SFRACT_FBIT__=7",
"__SACCUM_MIN__=(-0X1P7HK-0X1P7HK)",
"__DBL_HAS_QUIET_NAN__=1",
"__SIG_ATOMIC_MIN__=(-__SIG_ATOMIC_MAX__ - 1)",
"AVR=1",
"__BUILTIN_AVR_FMULS=1",
"__cpp_return_type_deduction=201304",
"__INTPTR_TYPE__=int",
"__UINT16_TYPE__=unsigned int",
"__WCHAR_TYPE__=int",
"__SIZEOF_FLOAT__=4",
"__AVR__=1",
"__BUILTIN_AVR_INSERT_BITS=1",
"__USQ_FBIT__=32",
"__UINTPTR_MAX__=0xffffU",
"__INT_FAST64_WIDTH__=64",
"__DEC64_MIN_EXP__=(-382)",
"__cpp_decltype=200707",
"__FLT32_DECIMAL_DIG__=9",
"__INT_FAST64_MAX__=0x7fffffffffffffffLL",
"__GCC_ATOMIC_TEST_AND_SET_TRUEVAL=1",
"__FLT_DIG__=6",
"__UINT_FAST64_TYPE__=long long unsigned int",
"__BUILTIN_AVR_BITSHK=1",
"__BUILTIN_AVR_BITSHR=1",
"__INT_MAX__=0x7fff",
"__LACCUM_FBIT__=31",
"__USACCUM_MIN__=0.0UHK",
"__UHA_IBIT__=8",
"__INT64_TYPE__=long long int",
"__BUILTIN_AVR_BITSLK=1",
"__BUILTIN_AVR_BITSLR=1",
"__FLT_MAX_EXP__=128",
"__UTQ_IBIT__=0",
"__DBL_MANT_DIG__=24",
"__cpp_inheriting_constructors=201511",
"__BUILTIN_AVR_ULLKBITS=1",
"__INT_LEAST64_MAX__=0x7fffffffffffffffLL",
"__DEC64_MIN__=1E-383DD",
"__WINT_TYPE__=int",
"__UINT_LEAST32_TYPE__=long unsigned int",
"__SIZEOF_SHORT__=2",
"__ULLFRACT_IBIT__=0",
"__LDBL_MIN_EXP__=(-125)",
"__UDA_IBIT__=32",
"__WINT_WIDTH__=16",
"__INT_LEAST8_MAX__=0x7f",
"__LFRACT_FBIT__=31",
"__LDBL_MAX_10_EXP__=38",
"__ATOMIC_RELAXED=0",
"__DBL_EPSILON__=double(1.19209290e-7L)",
"__BUILTIN_AVR_BITSUK=1",
"__BUILTIN_AVR_BITSUR=1",
"__UINT8_C(c)=c",
"__INT_LEAST32_TYPE__=long int",
"__BUILTIN_AVR_URBITS=1",
"__SIZEOF_WCHAR_T__=2",
"__LLFRACT_MAX__=0X7FFFFFFFFFFFFFFFP-63LLR",
"__TQ_FBIT__=127",
"__INT_FAST8_TYPE__=signed char",
"__ULLACCUM_EPSILON__=0x1P-48ULLK",
"__BUILTIN_AVR_ROUNDK=1",
"__BUILTIN_AVR_ROUNDR=1",
"__UHQ_IBIT__=0",
"__LLACCUM_IBIT__=16",
"__FLT32_EPSILON__=1.19209290e-7F32",
"__DBL_DECIMAL_DIG__=9",
"__STDC_UTF_32__=1",
"__INT_FAST8_WIDTH__=8",
"__DEC_EVAL_METHOD__=2",
"__TA_FBIT__=47",
"__UDQ_IBIT__=0",
"__ORDER_BIG_ENDIAN__=4321",
"__cpp_runtime_arrays=198712",
"__WITH_AVRLIBC__=1",
"__UINT64_TYPE__=long long unsigned int",
"__ACCUM_EPSILON__=0x1P-15K",
"__UINT32_C(c)=c ## UL",
"__BUILTIN_AVR_COUNTLSUHK=1",
"__INTMAX_MAX__=0x7fffffffffffffffLL",
"__cpp_alias_templates=200704",
"__BUILTIN_AVR_COUNTLSUHR=1",
"__BYTE_ORDER__=__ORDER_LITTLE_ENDIAN__",
"__FLT_DENORM_MIN__=1.40129846e-45F",
"__LLFRACT_IBIT__=0",
"__INT8_MAX__=0x7f",
"__LONG_WIDTH__=32",
"__UINT_FAST32_TYPE__=long unsigned int",
"__CHAR32_TYPE__=long unsigned int",
"__BUILTIN_AVR_COUNTLSULK=1",
"__BUILTIN_AVR_COUNTLSULR=1",
"__FLT_MAX__=3.40282347e+38F",
"__cpp_constexpr=201304",
"__USACCUM_FBIT__=8",
"__BUILTIN_AVR_COUNTLSFX=1",
"__INT32_TYPE__=long int",
"__SIZEOF_DOUBLE__=4",
"__FLT_MIN_10_EXP__=(-37)",
"__UFRACT_EPSILON__=0x1P-16UR",
"__INT_LEAST32_WIDTH__=32",
"__BUILTIN_AVR_COUNTLSHK=1",
"__BUILTIN_AVR_COUNTLSHR=1",
"__INTMAX_TYPE__=long long int",
"__BUILTIN_AVR_ABSLLK=1",
"__BUILTIN_AVR_ABSLLR=1",
"__DEC128_MAX_EXP__=6145",
"__AVR_HAVE_16BIT_SP__=1",
"__ATOMIC_CONSUME=1",
"__GNUC_MINOR__=3",
"__INT_FAST16_WIDTH__=16",
"__UINTMAX_MAX__=0xffffffffffffffffULL",
"__DEC32_MANT_DIG__=7",
"__HA_FBIT__=7",
"__BUILTIN_AVR_COUNTLSLK=1",
"__BUILTIN_AVR_COUNTLSLR=1",
"__BUILTIN_AVR_CLI=1",
"__DBL_MAX_10_EXP__=38",
"__LDBL_DENORM_MIN__=1.40129846e-45L",
"__INT16_C(c)=c",
"__cpp_generic_lambdas=201304",
"__STDC__=1",
"__PTRDIFF_TYPE__=int",
"__LLFRACT_MIN__=(-0.5LLR-0.5LLR)",
"__BUILTIN_AVR_LRBITS=1",
"__ATOMIC_SEQ_CST=5",
"__DA_FBIT__=31",
"__UINT32_TYPE__=long unsigned int",
"__BUILTIN_AVR_ROUNDLLK=1",
"__UINTPTR_TYPE__=unsigned int",
"__BUILTIN_AVR_ROUNDLLR=1",
"__USA_IBIT__=16",
"__BUILTIN_AVR_ULRBITS=1",
"__DEC64_SUBNORMAL_MIN__=0.000000000000001E-383DD",
"__DEC128_MANT_DIG__=34",
"__LDBL_MIN_10_EXP__=(-37)",
"__BUILTIN_AVR_COUNTLSUK=1",
"__BUILTIN_AVR_COUNTLSUR=1",
"__SIZEOF_LONG_LONG__=8",
"__ULACCUM_EPSILON__=0x1P-32ULK",
"__cpp_user_defined_literals=200809",
"__SACCUM_IBIT__=8",
"__GCC_ATOMIC_LLONG_LOCK_FREE=1",
"__LDBL_DIG__=6",
"__FLT_DECIMAL_DIG__=9",
"__UINT_FAST16_MAX__=0xffffU",
"__GCC_ATOMIC_SHORT_LOCK_FREE=1",
"__BUILTIN_AVR_ABSHK=1",
"__BUILTIN_AVR_FLASH_SEGMENT=1",
"__INT_LEAST64_WIDTH__=64",
"__ULLFRACT_MAX__=0XFFFFFFFFFFFFFFFFP-64ULLR",
"__UINT_FAST8_TYPE__=unsigned char",
"__USFRACT_EPSILON__=0x1P-8UHR",
"__ULACCUM_FBIT__=32",
"__QQ_IBIT__=0",
"__cpp_init_captures=201304",
"__ATOMIC_ACQ_REL=4",
"__ATOMIC_RELEASE=3",
"__BUILTIN_AVR_FMUL=1",
"USBCON"
]
}
]
}
Rust on Nano Every
Next up is trying to get Rust to run on the nano every which has a atmega4809. This was a weekend journey and probably could be done faster in the person driving had better skills. I document it here so people can may find this page and learn from the problems I have experienced.
Create Cargo Project
First off let create a new project
cargo new project_mecargo newcargo new project_me project_meAdd HAL (hardware abscraction layer) to project
Add the embedded-hal to project by going to the Cargo.toml and adding embedded-hal as a dependency. It is a generic layer and you will need a chip specific one as well.
[dependencies]
embedded-hal = "0.1.2"Using cargo build resulted in the following error
error[E0554]: `#![feature]` may not be used on the stable release channelThis is because we cannot use the stable toolchain which is the default. To list the toolchains available you can use.
rustup toolchain listIn my case, because I have already installed other toolchains, the output was
stable-x86_64-unknown-linux-gnu (default)
nightly-x86_64-unknown-linux-gnu
snowgoonsTo install the nightly toolchain use the rustup command.
rustup install nightlyWe can set this as the default with
rustup default stable-x86_64-unknown-linux-gnuNow we can run the cargo build and it completes successfully. We can set the toolchain to use in the an override file in the root directory rust-toolchain.toml. You find this in the overrides section of the rustup book. An example is shown below.
[toolchain]
#The name of the toolchain to use. We are using snowgoons as this is
channel = "nightly-x86_64-unknown-linux-gnu"
components = ["rust-src"]Adding Chip Specific HAL
In the videos by Vers Binarii it mentions finding the hal for an STM32F103C8T6 and guides you to lib.rs to get the board specific hal. Unfortunately this does not exist for the ATMega4809. So from there I made my way back to snowgoons where I first started. He suggested, at least to me, instead of stm32f1xx-hal I should use ruduino for my ATMega4809 (nano every). This gave the error
error: cannot find macro `llvm_asm` in this scopeGoogling led me to running the rustup update command
rustup updateWas not hopeful as I assume that I am already at the latest. After the version shown was (rustc 1.71.0-nightly). So I reran the build and...
error[E0635]: unknown feature `llvm_asm`Looking at this, and not that familiar with rust, I think they have renamed llvm_asm to asm and this appears avr_delay presumably used by ruduino. This went into the too hard basket and I went looking for a different hal. Next up is avr-oxide. Putting in the latest version at the time 0.4.0 ( nothing is version 1.0.0 :grinning: ). So running the build gives new and more fun problems.
|
22 | compile_error!("A clockspeed feature (\"16MHz\", \"20MHz\") must be enabled for this crate");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^