Soldering Page

Introduction

All things soldering or should I say sodering gar damn

Mine

Here is mine. [Hakko FX-888d]

Temperature

On the video it 400°C for lead free 450°C

Soldering a Resistor Wire

I used to want to melt the solder onto the joint but you need to heat the joint, in this case a resistor wire and the pad on the board together.

Then add the solder

Joining Wires

When joining wires, tin the wires first by heating the wire and then adding the solder.

Add Heat shrink one end and Hold Wires in position

Next join the two wires together