Nano Page

Introduction

This page is to provide information on the Nano v3.0. This is a different device to the model Nano Every as it uses the ATMega328 chip

Getting the ATMega328PB to work

When you buy a Nano v3.0 off some stores you actually get a device which has a ATMega328pb chip. You can tell this because the chip has it written on it.

I could not use this with Arduino IDE 2.1.1 on ubuntu 23.04 as it failed with the dreaded

avrdude: stk500_getsync(): not in sync: resp=0x00

Looking on YouTube I found this to be an error to be you need to use minicore and use their ATMega328pb. You I went to Arduino and added

https://mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json

As shown here.

But this still failed but is required.